comfortable switching and dimming of the FLEX systems using touch sensor technology
Never search for the remote control again
No cable laying + chiseling work required
The dimmable FLEX systems are supplied as standard with a 4-zone handheld transmitter.
Due to numerous inquiries for a permanently mounted switching option, we have developed a dimmer switch with which the new FLEX systems can be switched and dimmed. The dimmer switch is equipped with sensor surfaces - operation is performed by gently touching the sensor surfaces.
No cable laying is required for installation - signal transmission takes place via radio. Power is supplied by 2x CR 2032 button cells (included).
Only 2 holes need to be drilled to attach the mounting plate. The control surface is clipped onto this mounting plate - it is fixed by 4 magnets.
Important: Only suitable for FLEX systems purchased from July 2021 (the remote control must have a yellow indicator light).
The predecessor transformer dimmers (remote controls with a blue indicator light) cannot be programmed, as they use a different radio protocol. Not suitable for the 4-watt and micro systems.
Dimensions:
LxWxD: 86x86x14mm
cvdfdfvvfv